LOOS INTERNATIONAL - Heating, Hot Water and Steam Boilers

LOOS INTERNATIONAL is the most reputable manufacturer of heating boilers, hot water boilers and steam boilers in Europe and has delivered over 100,000 boilers to about 140 countries throughout the world since the year 1865. We manufacture approximately 1,500 boiler systems per year for every industrial and commercial application.

Cutting-edge production facilities located solely in German-speaking countries ensure a level of quality which is confirmed by official test and quality certificates from almost all the world's approval authorities and certification bodies.

Shell boilers and quick-steam generators

The production ranges from LOOS INTERNATIONAL are shell boilers and quick-steam generators from 80kg/h up to 55,000kg/h. Furthermore, we produce hot water boilers for capacities of up to 38MW, heating boilers up to 19.2MW. The different boiler series are manufactured in all pressure ranges and for all fuels and can be fitted if required with heat recovery systems to improve efficiency for all technical heating processes.

UNIMAT heating and hot water boilers

With the UNIMAT heating boiler series, we have applied the accumulated know-how of decades of three-pass boiler construction to a new concept. The LOOS design principle of the three-pass flame / smoke tube boiler has been outstandingly successful for the generation of low-pressure hot water and high-temperature hot water and emphasises that LOOS is in complete control of all media steam, warm water and hot water.

• UNIMAT heating boiler: type UT-L as flame-tube smoke-tube boiler with three-pass technology, accredited to the directive relating to appliances burning gaseous fuels up to an output of 750kW to 9,200kW for hot water generation
• UNIMAT hot water boiler: type UT-M as flame-tube smoke-tube boiler with three-pass technology, accredited to the pressure equipment directive up to an output of 750kW to 19,200kW for hot water generation
• Type UT-H as single flame-tube smoke-tube boiler with three-pass technology up to an output of 820kW to 18,300kW for hot water generation
• Type UT-HZ as double flame-tube smoke-tube boiler with three-pass technology up to an output of 13,000kW to 38,000kW for hot water generation

Flame and steam boilers

Shell boilers are flame and smoke tube boilers, whose tubes carry flue gases and are surrounded by the boiler water. The boilers are used wherever constant, high quality hot water or steam is required.

• Type U-ND/U-HD as flame tube boiler with two-pass technology up to an output of 250kg/h to 3,200kg/h (low pressure) and 250kg/h to 1,250kg/h (high pressure) for steam generation
• Type UL-S as single flame tube / smoke tube boiler with three-pass technology up to an output of 1,250kg/h to 28,000kg/h for steam generation
• Type ZFR as double flame tube / smoke tube boiler with three-pass technology up to an output of 18,000kg/h to 55,000kg/h for steam generation

If steam is not needed constantly a Quicksteam Generator with a special heating coil and low water content could be an alternative.

• Type DF as Quicksteam Generator with three-pass technology up to an output of 80kg/h to 2,000kg/h for steam generation

Boiler house components

Boiler house based on modular technology for easy planning, quick assembly and fully automated, safe operation of steam plants complete the range. Individual plant parts and components are correctly dimensioned, matched to each other and assembled into a ready-to-connect module.

LOOS modules and components for hot water boilers include:

• VL flow instrument sections
• RL return instrument sections
• RTH return temperature maintenance
• ECO-SA economiser modules

LOOS modules and components for steam boilers include:

• WSM-T/WSM-V water service modules with partial / full de-aeration
• CSM condensate service modules
• BEM blowdown, expansion and cooling systems
• PM/PM-P pump modules
• ECO-SA economiser modules
• LWA water analysis device

LOOS modules and components for boiler supply include:

• WTM water treatment modules
• LSC plant management system
• GRM gas regulating modules
• OCM oil circulating modules
• OSM oil supply modules
• OPM oil pre-heater modules
• Flow and return headers

Customer support

Servicing support around the clock, every day of the year: LOOS customer support offers a competent, fast, efficient customer service combined with central spare parts supply.

All new LOOS boilers are already prepared for LOOS-Teleservice. Through a modem connection LOOS can access the boiler automation devices, optimise and control parameters and obtain remote diagnoses.