Environmental Monitoring and Control

BASF Catalysts
Figure 1. In addition to increasing conversion efficiency, the unique Camet catalyst core utilizes thin foil walls which result in low pressure drop.	Figure 2. Front-end installation of the oxidation catalyst increases CO and VOC conversion.	Figure 3. A single-split in the boiler configuration accommodates both the oxidation and SCR catalysts.

Blackthorn Environmental
This diesel particulate filter can be electrically heated to burn off accumulated diesel particulate matter, thus making it suitable for engines with low exhaust gas temperature.	Catalytic converters for heavy-duty applications are normally based on metal substrates which combine durability with low backpressure.	An installation of diesel particulate filters on two 400kVa generators providing standby power to a data centre in central London.
Outside view of the data centre, showing exhaust flue pipes which have integral insulation to improve gas flow and improve the appearance.

Cascade Technologies
A local extractive (OnStack) gas analyser for emission monitoring and process optimisation.	An OnStack system with extractive probe.	The Cascade OEM module can be used in a variety of industrial applications.

Enviro Technology Services
AR600/650 analysers use DOAS and FTIR technology for accurate and reliable stack gas analysis.	Stack-mounted components of the Opsis CEM are made of rugged materials and are designed for a long service life.	O2000 analysers are TÜV and MCERTS approved for oxygen analysis in stack applications.
All Enviro Technology CEMS analysers are MCERTS approved and suitable for LCPD and WID applications.	The Opsis CEMS analyser is MCERTS certified for NO, NO₂, CO, SO₂, CO₂, O₂ and NH₃ analysis in stack applications.

Gasmet
Gasmet Technologies is a leading supplier of gas monitoring systems for demanding industrial and environmental applications.	Gasmet's gas analyzers are reliable, user-friendly and provide consistently accurate results.	Gasmet supplies state-of-the-art gas monitoring systems for a variety of different applications.

Haldor Topsoe
DNX® catalysts are based on a corrugated, reinforced, titanium-dioxide carrier homogeneously impregnated with active components.	Avedore units one and two's 650MW high-dust coal and bio-fuel fired boilers have a Topsoe SCR DeNOx system.	A crucial prerequisite for the SCR catalyst to perform at its best is proper design.
PPL Wallingford, Wallingford, CT, US; five 45MW gas turbines have a DNX catalyst for 92% NOx removal.	Palm Springs' LM6000 gas turbines are equipped with an SCR DeNOx catalyst.

Industrial & Marine Silencers
Eight 36in exhaust silencers manufactured for Doha International Airport, Qatar.	A 30in nominal bore steam vent silencer with 57in outlet bend was delivered in 2006 to a methanol plant on the island of Trinidad.	IMS manufactures emission-reduction systems, which can reduce CO, HC and NOx by up to 99%.
Acoustic canopies, manufactured to your design, are within the portfolio of IMS.	No project is 'too big or too small' for IMS; speak to a sales representative for help in deciding which product is best for your project.

LAMTEC
LAMTEC offers a wide range of products to control and optimise combustion, all from one source.	Infrared (IR), ultraviolet (UV) and ionisation (IO) flame detection for single and multiple-burner installations of all types; the picture shows the compact flame detector F200K with integrated flame evaluation device.	With LAMTEC O2/CO2 measurement devices, it is possible to optimise combustion to reduce pollution and to minimize consumption.
LAMTEC innovative burner control – a dynamic, self-optimising technology that could further increase efficiency of combustion plants.	In VISIOCONTROL, LAMTEC provides the state-of-the-art server solution that facilitates bidirectional connections with decentralised installations swiftly and without complication.

LAND
Genesis, the world’s first stand-alone flue gas zirconia oxygen analyser.	Model 4500 MkII⁺ dust and opacity emissions monitor, utilising patented measurement technology and featuring fully automatic calibration.	FGA^II continuous emissions monitor for measurement of CO, O2, CO2, NO, NO2, SO2 and NOx.
Lancom III is a lightweight and rugged portable flue gas analyser suitable for up to nine gas measurements.	Turbine Sentry is a proven, non-contact temperature monitoring system for combustion gas turbine rotor blades.

Optical Scientific, Inc.
Optical Scientific Inc. (OSI) provides automated environmental and weather monitoring sensors and systems.	OSI's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading.	OSI has customers in more than 25 countries including the US, Europe, Asia, Africa, South America, and Australia.
OSI’s Long-baseline Optical Anemometer (LOA) measures path-integrated crosswinds and turbulence.	The DSP-WIVIS is the most advanced present weather and visibility sensor ever made.

PCME
MCERTS / TÜV-approved dynamic opacity instruments monitoring the output from a boiler plant electro filter.	Our dynamic opacity sensors are quick and easy to install.	We provide particulate-emission monitoring systems for flue-gas desulphurisation plants.
ProScatter™ forward scatter instruments are recommended for gas-fired power plants.	The interspace between primary and secondary HEPPA filters, monitored by electrification sensors.

Proventia
The Proventia NOxBUSTER SCR emission control system keeps even the biggest applications running in a more environmentally friendly way.	The NOxBUSTER is a fully customisable exhaust purification system, which can be tailored to customers' specific needs.	NOxBUSTER is suitable for applications using oil, natural gas, and solid and liquid biofuels.
With emission restrictions tightening at seas, our emission control system is perfect for ships.

SICK
SICK Process Automation offers complete process / automation solutions and a wide variety of technologies for emission and process monitoring.	SICK is a world market leader in analyser technology for power plants including denitrification plants, exhaust gas desulphurisation plants, electrostatic filters and hose filters.	Our ultrasonic gas flow metering products offer high-precision gas flow measurement with no noticeable pressure loss through pipework internals.
High performance generators produce large amounts of heat, and therefore cooling gas monitoring is essential to improve efficiency and prolong generator life.

Sirius Engineers
Plant design for FGD in the Czech Republic.	Flue gas duct design and construction management for retrofitted FGD plants.	Process technology design solutions and management.
Engineering management for complicated process-plant investments.

Trace
Trace Environmental Systems is the industry leader in providing turnkey continuous emission-monitoring (CEM) solutions for stacks, as well as data acquisition and reporting software.	Trace provides complete CEM and predictive emissions monitoring (PEM) systems for many different industries.	We are the only system provider that offers both CEMs and PEMs.

Unitemp
Unitemp’s range of portable instruments includes products for compressed air monitoring, and measuring air quality (CO and CO2) and air velocity.	Unitemp supplies a range of humidity and data loggers from testo.	The Gefran 600 high-performance, configurable temperature controller is widely used in the industry for processes involving transmitters and temperature sensors.
Unitemp offers temperature sensors, pressure transmitters and signal conditioners.	Unitemp has an officially authorised calibration laboratory for temperature and humidity measurement, and offers calibration certificates according to ISO 9001 / ISO 10012:2003 requirements.

Wahlco
Wahlco's 68,000ft² manufacturing facility.	Large skid-based ammonia flow control unit (AFCU) for metering and dilution of ammonia for use in a hot flue gas side stream.	Large AFCU for metering and dilution of ammonia into electrically-heated blowers.
U2A® steam-heated urea to ammonia hydrolyser skid for SCR NOx reduction.	U2A electrically heated urea to ammonia hydrolyser for up to 200lb/hr ammonia product delivery.

Browse Products and Services