|
GTCC helps you extend the operational life of your analog turbine control; we are a complete electronic controls source. These days, it has become increasingly difficult for operators of early model gas turbines to source replacement parts not only for their older model turbine but also for the electronic control that was originally installed with it. WESTINGHOUSE CONTROLS Many OEMs no longer support the analog control system that was installed, which makes it difficult for an operator to maintain a proper inventory of on-hand spare parts. Often, the only option offered by the OEM is to repair the part, which can take several weeks, and cost nearly half of the retail price new (which has a 14 week lead time or more). GENERAL ELECTRIC CONTROLSAs a result, operators are increasingly faced with pressures to upgrade their control systems, an option that carries with it daunting costs, including cost of equipment, downtime for installation and calibration, and re-training of personnel. On top of that, the software based micro-controller offered by many OEMs as an upgrade leaves the operator with a system that on the one hand is more sensitive to the environment, and on the other hand is opaque: the operator's technicians lack the tools and knowledge necessary to maintain and program the control, leaving the operator dependent on the OEM for all servicing of the control. GTCC is an alternative solution to these problems: GE MkI, GE MkII AND GE MkIV GTCC offers a solution for the operator who would prefer not to upgrade its control system. We maintain extensive inventories of components for General Electric MkI, MarkII and MarkIV systems, as well as many MkV circuit boards, Siemens Simatic S3 and S5, Cooper Rolls Entronic, Westinghouse G50 and other systems, with prompt testing and delivery of in-stock items. GE SPEEDTRONICOur stock of more than 6,000 GE Speedtronic Mark II circuit boards is perhaps the largest in the world. We offer competitive pricing and prompt delivery, and are usually able to supply a card from stock within 24 to 48 hours of your order. We can supply many OEM parts in either unused or refurbished condition and all our refurbished parts are fully tested by our in-house technicians and carry GTCC's one-year warranty against defects. Exchange pricing is also available for most parts. GE TURBINE CONTROLSGTCC also stocks many of the all-important hot gas path components of some older-model gas turbines, including Frame 3, Frame 5, and Frame 6. These include: buckets, nozzles, hatchets, power turbines, combustion liners and exhaust stacks, all precision refurbished by our turbine specialist partners and fully warranted against defects. For more information, please contact:
Gas Turbine Controls Corporation
PO Box 104 466 Saw Mill River Road Ardsley, New York 10502 USA Tel: +1 914 693 0830 Fax: +1 914 693 3824 Email: sales@gasturbinecontrols.com URL: www.gasturbinecontrols.com |
![]() GTCC helps you extend the operational life of your analog turbine control; we are a complete electronic controls source. |
![]() GTCC offers a solution for the operator who would prefer not to upgrade its control system. | |
![]() We stock more than 6,000 GE Speedtronic Mark II circuit boards. | |
![]() GE MkI, GE MkII AND GE MkIV components. |