Power Plant Equipment
| ABB Switzerland | ||
UNITROL® 6000 static excitation system. |
UNITROL 6000 AVR for low power applications. |
MEGATROL combined solution with static excitation and static frequency converter. |
SYNCHROTACT® 5 synchronizing device. |
UNITROL® 1000 automatic voltage regulator. |
|
| AE&E | ||
Turnkey next-generation combined-cycle power plants. |
Leading technologies for thermal waste treatment plants. |
Innovative environmental technologies. |
Power generation solutions for industry and power producers. |
High quality workshops for specialised industrial equipment. |
|
| Alimak | ||
A new generation ALIMAK SE lifts is now available. |
ALIMAK Rack and Pinion lifts ensure safe and reliable access and are particularly well suited to tough operating conditions. |
ALIMAK lifts on chimneys – to monitor emissions, check aircraft lights and find corrosion or damage to stone or brickwork. |
ALIMAK possesses unmatched experience from customised transport solutions for the most varying purposes and environments. Nuclear power plant in Oskarshamn, Sweden. |
||
| Allen Gears | ||
Allen Gears is the world leader in the design and manufacture of high performance gearboxes for a whole range of industrial power generation applications. |
The Advanced Epicyclic Gear (AEG) offers high levels of mechanical efficiency. |
Parallel Shaft gearboxes represent a high specification gearbox solution. |
Allen Gears are skilled at designing and manufacturing tailor made solutions that meet specific system specifications. |
||
| BFI Automation | ||
BFI Automation specialises in flame monitoring and evaluation systems. |
The flame monitoring and evaluation system 3000/4000 is specially designed to protect personnel and plants from explosions due to flameouts. |
This inexpensive, self-contained flame scanner and monitoring gain-controlled amplifier Type 8.XX is housed in an IP65 enclosure (dust and weather proof). |
The T1 is a self-contained dual wavelength pyrometer designed to provide this information concerning the temperature level in boilers. |
The fibre optic flame scanner series is an extension to the flame monitoring and evaluation system 3000/4000 whilst maintaining full compatibility. |
|
| BHS - Voith Turbo BHS Getriebe | ||
BHS' A-series parallel shaft gear unit (type AD63Q) features a mounted pump and BHS rotor turning gear unit. |
Our WG series multi-pinion integral gear unit is equipped with thrust cone technology for the compression of gases in power plant systems. |
BHS' E-PACK® planetary gear unit type RTP is specially designed for slow-speed side operations. |
| Braden | ||
Braden is a global leader in the design, manufacture, installation and retrofit of auxiliary equipment for gas turbines. |
Braden's products include inlet air filter houses, inlet ducts and plenums with acoustic silencers and turbine enclosures to exhaust plenums or diffusers. |
Braden offers a complete line of inlet air treatment components, as well as comprehensive inlet air treatment systems. |
Braden provides exhaust silencers, bypass stacks, expansion joints, exhaust diffusers, diverter dampers, exhaust stacks, ductwork, stack dampers, and CO / SCR systems. |
Braden is uniquely qualified to provide our own complete line of inlet air treatment components. |
|
| CBlade | ||
Blades can be either machined on the airfoil or fully machined and ready to be assembled on the rotor. |
A 4-axis automatic preforging line consisting of a mechanical hand connected to a hydraulic press is used to automate preforming operations in order to obtain a uniform blade quality. |
CBlade's ERIE 450kJ drop forging hammer is capable of forging 1,300mm long blades with a starting weight of 100kg. |
This five-axis and five-spindle Starrag NX 255 machining centre for the airfoil finishing is able to machine five blades, up to 1,200mm in length, at one time. |
CBlade's machining department with twelve CNC milling machines that include Starrag NX, Starrag HX, Heckert CWK and CB Ferrari Machines. |
|
| Converteam | ||
Hydro: run-off river power plant. |
Simple gas turbines in the power industry. |
Highly efficient inverters for the renewable power industry. |
High performance motors and generators. |
||
| Densit | ||
The Esjberg coal fired power plant used over 300 Densit lined components including bends, splitters and mills. |
Densit WearFlex being directly trowelled onto anchoring mesh. |
PF piping produced by Densit to exact client specifications. |
Densit WearSpray is installed to improve flexibility. |
||
| Deritend RMB | ||
Deritend RMB offers the UK’s leading gearbox and power transmission maintenance service. |
Deritend RMB offers a specialist design, fabrication and assembly service for large fabrication projects, including full project management. |
Craneage capacity including 3x20t cranes allows Deritend RMB to manufacture and repair large machinery. |
All sizes and types of gear box can be re-furbished or completely rebuilt including worm and wheel and helical gears. |
Deritend RMB is capable of creating bespoke gearbox solutions from scratch, often producing a far more energy efficient solution for each application. |
|
| Fans and Blowers | ||
Fans and Blowers offers standard components for radial blowers for costumer assembly. |
Direct driven two-step side channel blowers designed for oil free conveying of non-explosive and non-aggressive media. |
Fans and Blowers offers a range of direct driven cast centrifugal fans with backward curved blades in aluminium sheet. |
Fans and Blowers is the ideal answer to your needs for general-purpose high-pressure fans as well as gas boosters and exhausters. |
Our experienced engineers will visit your site and after detailed consultations with you, will offer you professional consultancy services. |
|
| Fireye | ||
The Fireye Paragon, type 105F1-1scanner is a new concept in flame analysis. |
The Fireye InSight Type 95IR, 95UV and 95DS flame scanners are microprocessor based flame scanners utilizing solid-state infrared (IR), ultraviolet (UV) or dual (IR and UV) sensors. |
Fireye Phoenix 85UVF self- checking scanners are used to detect ultraviolet emissions from fossil fuel flames such as natural gas, coke oven gas, propane, methane, butane, kerosene, light petroleum distillates and diesel fuels. |
| Flebu International | ||
Fan installation, power plant in Chile. |
Flebu has effective solutions for transportation and control of air, flue gases, processed air and hazardous gases. |
Flebu fans meet all specified standards and directives with regards to performance, vibration levels, balancing, noise levels, material strengths and durability. |
Flebu International provides tailor-made solutions for waste to energy plants, utility boiler manufacturers and pulp and paper mills. |
||
| GEA Westfalia Separator Systems | ||
Centrifugal separation systems from Westfalia Separator Mineraloil Systems help you avoid unplanned shut-downs and cut costs. |
Bowl cross section of a self-cleaning fuel oil separator with disc bowl. |
Liquid fuel oil treatment unit with control panel for hazardous area installation. |
Fuel oil treatment system with six separators. |
Fuel oil washing system. |
|
| Hadek Protective Systems | ||
Lightweight Pennguard® borosilicate glass block linings are used worldwide in new power plant chimneys. |
Pennguard borosilicate glass block linings are impermeable, acid-resistant and suitable for steel, concrete and brickwork substrates. |
Pennguard linings can be applied in existing brick chimney flues, quickly and easily, with minimum downtime. |
Pennguard linings are suitable for new ducts and retrofits; no expensive external insulation is required. |
||
| Hydratight Operations | ||
By offering the highest quality torque and tension equipment, Hydratight has developed a reputation as a preferred supplier to the power industry. |
Hydratight’s lines of hydraulic torque wrenches (RSL, S and LP) offer a complete range of output for bolting on boilers, pumps, valves, turbines and heat exchangers. |
Hydratight’s engineers can develop bespoke tools to solve some of the most demanding field, machining and bolting applications in the world. |
We offer high quality on-site services, including in-situ machining such as pipe cutting, beveling, milling, boring, grinding and end prepping. |
Hydratight offers bolting training courses as well as an electronic learning package. |
|
| International Energy Resources | ||
Frame 9171E gas turbine power package. |
Refurbished Frame 5 gas turbine rotor. |
OEM 9E first stage buckets. |
Power Solution Packaging. |
Ruston TB5000 mobile GT refurbishment. |
|
| Kato Engineering | ||
Kato traction alternators are the premier choice for mine-haul trucks. |
Kato's new generators for steam and gas turbine applications combine high-power density and high performance with an economical price. They are available from 3.5MW to 15MW in 50Hz or 60Hz. |
In Manassas, Virginia (USA) eight Kato generators coupled to CAT diesel engines provide 12MW of utility power. Many cities are installing similar facilities for peak-shaving and emergency power (Caterpillar photo). |
In order to meet the petroleum drilling contractor's demand for more power, Kato Engineering has introduced a new 2,500kVA generator. Smaller and less costly than our previous 2,500kVA design, it will better meet the needs of today's drilling market. |
Kato Engineering has generators on dozens of US Navy ships, including destroyers, frigates and carriers, as well as on many other supply, surveillance and command vessels (US Navy photo). |
|
| Kissling | ||
ER-Series - industrial standard single stage gear. |
Epyclic ASTRO-Gear - highly compact and very robust. |
Kissling is a pioneer in gear-engineering and one of the leading suppliers in the ropeway drive segment. |
| Klöpper-Therm | ||
Klöpper-Therm provides fuel gas heaters for use in a wide range of high temperature and pressure applications. |
Klöpper-Therm’s air heaters are made according to the UOP standard. |
Klöpper-Therm’s immersion heater during manufacture. |
Klöpper-Therm provides process gas heaters for use in chemical, petrochemical, pharmaceutical, textile, steel and cellulose industries. |
Klöpper-Therm’s wiring and connection box, Ex d, IP 66. |
|
| MAN TURBO | ||
Two THM gas turbines installed at a CHP plant in Korea. |
Three 38MW condensing steam turbine generators for a combined cycle power plant in the Dominican Republic. |
Process-gas axial-flow turboexpander. |
Fuel gas compressor skid for a CCGT power plant in Spain. |
THM gas turbine package for a pipeline compression station in the Middle East. |
|
| National Oilwell Varco | ||
National Oilwell’s Baylor brushless synchronous generators are built for extreme duty. |
Wound Stator Assembly. |
Rotor Assembly. |
| Peter Brotherhood | ||
24MW steam turbine supplied to an FPSO vessel moored off Mauritania. |
20MW and 13MW steam turbines on test at Peter Brotherhood's facility. |
12MW steam turbine for an FPSO vessel moored off Brazil. |
25.5MW steam turbine supplied to the Isis Central sugar mill in Australia. |
8MW steam turbine for a Spanish olive waste fired power plant. |
|
| Pfister | ||
Inside view of Pfister rotor weighfeeder TRW-K feeding crushed coal. 1: Inlet, 2: rotor wheel, 3: outlet, 4: bearings, 5: load-cell, 6: variable speed drive, A-A: eccentric weighing axis. |
Lower part of rotor weighfeeder TRW-K. Lower sealing plate with discharge opening, outer ring and rotor wheel inside which transports the material. |
Typical installation. Rotor weighfeeder TRW-K with vibrating chute to match rectangular bin outlets. |
Quality test and assurance. Rotor weighfeeder TRW-K with electronic control cabinet during functional test in Pfister workshop. |
Rotor weighfeeder installation. It replaced a traditional belt weighfeeder. |
|
| Power Developments International | ||
Completed engineer, procure and construct (EPC) turnkey project. |
Capacities up to approx 200MW in open cycle, combined cycle or co-generation configurations. |
Factory ready gas turbine generator (GTG). |
On site GTG erection. |
MJB International is a recognised industry leader providing a comprehensive after sales support service to users of industrial rotating equipment - a one-stop-shop for all requirements. |
|
| Pratt & Whitney Power Systems | ||
The FT8 is compact, easy to install, and capable of using a variety of fuels. |
The FT8 MOBILEPAC is 25 MW of mobile power on wheels. This unit can be operating in less than one day after arriving on site (site ready). |
SWIFTPAC units are configured as multi-trailer modular systems with a majority of the units pre-assembled at the factory, allowing for rapid installation. |
| Rolls-Royce | ||
More than 2,500 Rolls-Royce 501 industrial gas turbines, with power output between 4MW to 6MW, have been supplied to customers in 40 countries. |
Industrial RB211 power gensets, from 27.5MW to 32.1MW, are available in a wide variety of configurations to meet individual project requirements, in both gas and dual-fuel versions. |
At up to 58MW, the Trent 60 is the most powerful aeroderivative gas turbine on the market. |
All Rolls-Royce gas turbines are backed by a global world-class aftermarket organization offering everything from spare parts to engineered solutions, to long-term service agreements. |
||
| SANBORN | ||
SANBORN's manual, NC and CNC machining tools. |
Speciality high-alloy or stainless-steel fasteners are produced by SANBORN. |
Water, steam and gas turbine and pump repair is amongst the company's services. |
Renovation of old friction bearing housings and recasting of new Babbitt and composite metals is performed statically or centrifugally. |
SANBORN's ultra-filtration systems are used for liquidation and regeneration of oily waste water, cutting oils, emulsions and degreasing baths. |
|
| Solon Manufacturing Company | ||
Many of Solon's pressure switches are UL Listed and CSA Certified for use in outdoor applications as well as explosion proof areas, including the wireless pressure switch. |
Solon's temperature compensated switch / gas density switch is a reliable and economical way to monitor SF6 gas density in high voltage circuit breakers. |
To ensure no measurable leakage of our metal pressure sensing assemblies, Solon uses helium mass spectrometers for leak detection testing. |
Solon's switches are engineered, assembled, and fully tested providing special markings, control settings, certifications and drawings to aid the customer with installation. |
||
| Stork Power Services | ||
Stork Turbo Service improves rotary and electric equipment. |
Stork Thermeq is specialized in overhaul and retrofitting of water-tube boilers. |
Stork Turbo Blading uses reverse-engineering to manage blade production. |
Stork Gears & Services has worldwide expertise in gearbox repair. |
||
| TESI Group | ||
The TESI Group supplies power electronic and power accessories technology to the power industry worldwide. |
Our range includes ignition devices, energy cable accessories, cable marking systems, pre-insulated pipe outer joints and induction heating equipment. |
A full range of accessories for mv / lv energy cables is available. |
TESI portable ignition devices are used to ignite pilot torches and are a valuable resource in case of emergency or electrical shut down. |
TESI has extensive hands-on experience with all of our power accessory products. |
|
| ThyssenKrupp VDM | ||
ThyssenKrupp VDM possesses in-depth expertise in manufacturing high performance alloys for the power generation industry. |
ThyssenKrupp VDM's range of Nicrofer alloys are designed to withstand high temperatures and combustion-related corrosion. |
The company's facilities have been specially built to produce the purest alloys with the lowest possible trace element contents. |
| Turbologistics | ||
Turbologistics holds the largest single stock of HP and LP rotors for the GE 5002 turbine. |
Turbologistics holds an inventory of capital spare parts for both the GE Frame 3, Frame 5 and Frame 6 turbines, as well as Westinghouse 191, 251 and 501 models. |
Turbologistics stocks a wide range of gas turbine parts that are available in used or refurbished condition. |
Turbologistics owns complete gas turbine packages. |
||
| Wärtsilä Corporation | ||
The 267.4MW Pavana III power plant in Honduras, Central America, is one of the world's largest heavy fuel (HFO) plants using reciprocating engines. |
Wärtsilä reciprocating engines offer stable output and high performance in hot and dry conditions as well as at high altitudes. |
Trigeneration is the conversion of a fuel into three useful energy products: electricity, hot water or steam and chilled water. A recent example of trigeneration in action is the power plant for the extension of Barajas Airport in Madrid. |
For the oil and gas industry Wärtsilä provides pre-engineered power generation equipment and complete prime movers and their auxiliaries. |
||
| Wenutec | ||
Multiple Stud Tensioner (MST) tensions or de-tensions all reactor studs simultaneously in a single operation. |
Stud rack for transportation of 18 RV studs at NPP Vogtle (USA). |
Ring type tensioners provided for Manway covers, hand-hole and eye-hole covers. |
| Zambetti e Lumina | ||
Zambetti e Lumina fabricates quality components related to gas turbines to suit our clients’ requirements, including dampers and diverters. |
Stack dampers. |
Multi-blade diverters. |
Single blade diverters. |
Our team of experts is available for commissioning and after sale assistance relating to regulating / on-off systems for flue gas control. |
|
