MOGAS - Severe Service Ball Valves

Severe plant conditions can quickly turn into severe consequences for your business. That’s why companies worldwide turn to MOGAS Industries – the leading provider of severe-service, metal-seated ball valves.

Combining over three decades of experience with the most advanced manufacturing practices available, MOGAS helps ensure process integrity, uptime reliability and personnel safety.

The result – immediate business efficiencies and lower total cost of ownership in the long term. In short, MOGAS valves perform in the harshest environments so your company can too.

THE MOGAS DEFINITION OF SEVERE SERVICE BALL VALVES

• High temperature – up to 1,652°F / 907°C
• High pressure – up to 30,000psig / 2,068bar(g)
• Corrosive applications
• Abrasive particulates
• Acidic products
• Lethal media
• Heavy solids build-up
• Viscous sludge
• Critical plant safety applications

BALL VALVES FOR POWER GENERATION

MOGAS is well-known throughout the power industry because we solve issues that routinely plague power plants – leaking valves, seat erosion, blown packing, and the inability to isolate critical equipment – all of which contribute to significant heat rate loss and safety concerns.

What sets MOGAS apart is more than just our utilization of sound design, manufacturing and testing practices. We’ve made it a habit to carefully listen to our end-users’ performance issues and goals, and we’ve taken their feedback into consideration when engineering each and every component of our valve line.

No leakage, limited maintenance and superior reliability, make a MOGAS valve the easiest and most cost-effective valve to operate. Our portfolio of valve solutions lets you choose the design, trim, materials, and coatings that best fit your severe service application.

MOGAS valves meet the following standards:

• Stamped with the ASME "V" stamp
• PED compliant for the European Union
• Leakage rates per MSS SP-61
• Shell tests performed at 1.5 max cold working pressure
• Seat closure tests performed at 1.1 max cold working pressure  

MOGAS provides its advanced technology to the power industry with the RSVP, PORV, C-Series, SC-3 Piece, SD and GEN-X lines to handle high temperatures, high pressures, high cycling, thermal shock and abrasive media.

RSVP - ASME 600 - 4500 BALL VALVES

The MOGAS RSVP ball valve line is dedicated to the absolute isolation of critical equipment, dependable on/off operation for drains and vents, as well as longer valve life for increased run-time. RSVP ball valves are designed to handle high-temperatures, high pressures, high-cycling, thermal shock and abrasive media.

C-SERIES - ASME 150-4500 CLASS ISOLATION VALVES

The C-Series valve is the best ball valve choice in large bore isolation applications. MOGAS engineers have successfully designed the C-Series valve line which isolates under the extreme conditions – high temperature up to 1,652°F, high pressures up to 30,000psig, media build-up, cycling with solids in the line and erosive attack of materials and coatings. With more than 35 years of engineering expertise, each C-Series valve is designed specifically for the application.

PORV - ASME 1500 / 2500 / 4500 PRESSURE RELIEVING BALL VALVES

The MOGAS PORV, a pneumatic actuated pressure relieving valve, prevents excessive system pressure accumulation. The set pressure of the PORV is lower than that of the spring loaded safety valve to prevent or reduce the number of lifts of the safety valve, thus extending their life. The PORV is available either non-stamped or with the "V" stamp. The "V" stamped PORV has been flow certified by the National Board of Boiler and Pressure Vessel Inspectors.

SC-3PC ASME 2500 CLASS THREE-PIECE BALL VALVES

The SC-3PC ball valve has a three-piece body assembly with two proprietary body seals that allow the valve body to be easily removed while the end connections remain in line. The design also allows the valve body to be tested after repair, prior to insertion back in-line. The SC-3PC is used in power plants for isolation of high pressure/high temperature applications.

GEN-X - ASME 600 / 900 / 1500 SEVERE SERVICE BALL VALVES

MOGAS Gen-X metal-seated severe service ball valves are engineered in accordance with ASME TDP-1 1998. The Gen-X valves are built and tested for the prevention of water damage to your steam turbines. The cold reheat drain, hot reheat drain, and main steam drain Gen-X valves meet and/or exceed TDP bore and reliability requirements.