Zignago Biomass Power Plant is a 17.9MW biopower project. It is located in Veneto, Italy. The project is currently active. It has been developed in single phase. Post completion of construction, the project got commissioned in 2012.

Project Type Total Capacity (MW) Active Capacity (MW) Pipeline Capacity (MW) Project Status Project Location Project Developer
Biopower 17.9 17.9 Active Veneto, Italy Aalborg Energie Technik

Description

The project was developed by Aalborg Energie Technik and is currently owned by Zignago Power.

The project cost is $98.451m.

The process of combustion has been adopted in this combined heat and power (CHP) project to release the stored energy from the feed. Agricultural by-product and wood by-product are used as a feedstock to power the project.

Development Status

The project got commissioned in 2012.

Contractors Involved

Aalborg Energie Technik supplied steam boiler for the project. The temperature witnessed inside the boiler is around 522Degree Celsius. The steam is pressurized inside the boiler at 92bar.

About Aalborg Energie Technik

Aalborg Energie Technik AS (AET) is an engineering and contracting company that supplies biomass fired boiler plants, power plants, and cogeneration or combined heat and power plants. The company’s products include biomass boilers, biomass cogeneration plants, combustion systems, fuel handling systems, steam turbine generator and condenser, feed water and flue gas cleaning systems, and PLC control and SCADA systems. Its services comprise emission reduction, plant improvements, rebuild and upgrades, efficiency optimization, operation and maintenance, inspection and reporting, and others. AET carries out operation and maintenance, consultancy work, overhaul and maintenance activities, and assists in the optimisation of the operating conditions for existing plants. The company caters to energy sectors. AET is headquartered in Aalborg, Denmark.

Methodology

All power projects included in this report are drawn from GlobalData’s Power Intelligence Center. The information regarding the project parameters is sourced through secondary information sources such as electric utilities, equipment manufacturers, developers, project proponent’s – news, deals and financial reporting, regulatory body, associations, government planning reports and publications. Wherever needed the information is further validated through primary from various stakeholders across the power value chain and professionals from leading players within the power sector.