Bethlehem Power Plant is a 1,153MW gas fired power project. It is located in Pennsylvania, the US. The project is currently active. It has been developed in multiple phases. Post completion of construction, the project got commissioned in December 2002.
| Project Type | Total Capacity (MW) | Active Capacity (MW) | Pipeline Capacity (MW) | Project Status | Project Location | Project Developer | Thermal | 1,153 | 1,153 | – | Active | Pennsylvania, the US |
|---|
Description
Go deeper with GlobalData
The project is currently owned by Calpine with a stake of 100%.
It is a combined cycle gas turbine (ccgt) power plant. The power plant run on dual-fuel. The primary fuel being used to power the plant is natural gas. In case of shortage of natural gas the plant can also run on Distillate Fuel Oil. The fuel is procured from UGI Utilities, Inc..
The project generated 4,209,636MWh of electricity.
Development Status
US Tariffs are shifting - will you react or anticipate?
Don’t let policy changes catch you off guard. Stay proactive with real-time data and expert analysis.
By GlobalDataThe project got commissioned in December 2002.
Contractors Involved
Bethlehem Power Plant (Bethlehem Power Plant Block I Unit I) is equipped with Siemens SGT6-2000E gas turbine. The phase consists of 1 gas turbine with 127MW nameplate capacity.
Bethlehem Power Plant (Bethlehem Power Plant Block I Unit II) is equipped with Siemens SGT6-2000E gas turbine. The phase consists of 1 gas turbine with 127MW nameplate capacity.
Bethlehem Power Plant (Bethlehem Power Plant Block I Unit III) is equipped with Siemens SGT6-2000E gas turbine. The phase consists of 1 gas turbine with 127MW nameplate capacity.
Bethlehem Power Plant (Bethlehem Power Plant Block I Unit IV) is equipped with GE Power steam turbine. The phase consists of 1 steam turbine with 195.5MW nameplate capacity.
Bethlehem Power Plant (Bethlehem Power Plant Block II Unit I) is equipped with Siemens SGT6-2000E gas turbine. The phase consists of 1 gas turbine with 127MW nameplate capacity.
Bethlehem Power Plant (Bethlehem Power Plant Block II Unit II) is equipped with Siemens SGT6-2000E gas turbine. The phase consists of 1 gas turbine with 127MW nameplate capacity.
Bethlehem Power Plant (Bethlehem Power Plant Block II Unit III) is equipped with Siemens SGT6-2000E gas turbine. The phase consists of 1 gas turbine with 127MW nameplate capacity.
Bethlehem Power Plant (Bethlehem Power Plant Block II Unit IV) is equipped with GE Power steam turbine. The phase consists of 1 steam turbine with 195.5MW nameplate capacity.
Nooter/Eriksen supplied steam boiler for the project.
Methodology
All power projects included in this report are drawn from GlobalData’s Power Intelligence Center. The information regarding the project parameters is sourced through secondary information sources such as electric utilities, equipment manufacturers, developers, project proponent’s – news, deals and financial reporting, regulatory body, associations, government planning reports and publications. Wherever needed the information is further validated through primary from various stakeholders across the power value chain and professionals from leading players within the power sector.
