Koge CHP Plant is a 25MW biopower project. It is located in Zealand, Denmark. The project is currently active. It has been developed in multiple phases. Post completion of construction, the project got commissioned in 1986.
Project Type | Total Capacity (MW) | Active Capacity (MW) | Pipeline Capacity (MW) | Project Status | Project Location | Project Developer | Biopower | 25 | 25 | – | Active | Zealand, Denmark | Babcock & Wilcox Volund |
---|
Description
The project was developed by Babcock & Wilcox Volund and is currently owned by Vestegnens Kraftvarmeselskab I / S.
The process of combustion has been adopted in this combined heat and power (CHP) project to release the stored energy from the feed. Wood by-product is used as a feedstock to power the project.
Development Status
The project got commissioned in 1986.
Contractors Involved
Koge CHP Plant (Koge CHP unit 7) is equipped with AEG KANIS AEG Kanis Back Pressure Turbine turbines. The phase consists of turbines with 9.4MW nameplate capacity.
Babcock & Wilcox Volund supplied steam boiler for the project. The boiler installed at the site has a capacity of 64TPH. The temperature witnessed inside the boiler is around 14°C. The steam is pressurized inside the boiler at 93bar.
About Babcock & Wilcox Volund
Babcock & Wilcox Volund AS (B&W Volund), a subsidiary of Babcock & Wilcox Enterprises Inc, is a renewable energy company that provides equipment and technologies designed to convert waste and biomass into thermal energy. The company provides support and services such as maintenance, upgrades and optimization; assessments, spare parts services, and training and networking. It offers spare parts such as dynagate, volund combustion gate, biomass combustion gate, coal combustion gates, fuel feeding system, boiler system and ash and clinker handling system. The company has operations in Sweden and Denmark. B&W Volund is headquartered in Esbjerg, Denmark.
Methodology
All power projects included in this report are drawn from GlobalData’s Power Intelligence Center. The information regarding the project parameters is sourced through secondary information sources such as electric utilities, equipment manufacturers, developers, project proponent’s – news, deals and financial reporting, regulatory body, associations, government planning reports and publications. Wherever needed the information is further validated through primary from various stakeholders across the power value chain and professionals from leading players within the power sector.