James M Barry Combined Cycle Power Plant is a 1,070.8MW gas fired power project. It is located in Alabama, the US. The project is currently active. It has been developed in multiple phases. Post completion of construction, the project got commissioned in May 2000.
| Project Type | Total Capacity (MW) | Active Capacity (MW) | Pipeline Capacity (MW) | Project Status | Project Location | Project Developer | Thermal | 1,070.8 | 1,070.8 | – | Active | Alabama, the US |
|---|
Description
Go deeper with GlobalData
The project is currently owned by Alabama Power with a stake of 100%.
It is a Combined Cycle Gas Turbine (CCGT) power plant. The fuel is procured from Bay Gas.
The project generated 7,081,385MWh of electricity.
James M Barry Combined Cycle Power Plant (James M Barry Combined Cycle Power Plant Phase I) consists of 1 steam turbine with 195.2MW nameplate capacity.
US Tariffs are shifting - will you react or anticipate?
Don’t let policy changes catch you off guard. Stay proactive with real-time data and expert analysis.
By GlobalDataJames M Barry Combined Cycle Power Plant (James M Barry Combined Cycle Power Plant Phase II) consists of 1 steam turbine with 195.2MW nameplate capacity.
Development Status
The project got commissioned in May 2000.
Contractors Involved
James M Barry Combined Cycle Power Plant (James M Barry Combined Cycle Power Plant Phase I) is equipped with GE Power MS7001FA gas turbines. The phase consists of 2 gas turbines with 170.1MW nameplate capacity.
James M Barry Combined Cycle Power Plant (James M Barry Combined Cycle Power Plant Phase II) is equipped with GE Power MS7001FA gas turbines. The phase consists of 2 gas turbines with 170.1MW nameplate capacity.
Vogt Power International supplied steam boiler for the James M Barry Combined Cycle Power Plant (James M Barry Combined Cycle Power Plant Phase I).
Vogt Power International supplied steam boiler for the James M Barry Combined Cycle Power Plant (James M Barry Combined Cycle Power Plant Phase II).
Methodology
All power projects included in this report are drawn from GlobalData’s Power Intelligence Center. The information regarding the project parameters is sourced through secondary information sources such as electric utilities, equipment manufacturers, developers, project proponent’s – news, deals and financial reporting, regulatory body, associations, government planning reports and publications. Wherever needed the information is further validated through primary from various stakeholders across the power value chain and professionals from leading players within the power sector.
