Quintel is a woman-owned business specializing in reconditioning, repair and remanufacture of heat exchangers from original specs, as well as reselling of OEM heat exchangers.
Customers rely on our sales and support staff to provide technical knowledge and expertise across the entire range of heat exchangers, such as shell and tube, plate, air, marine and water-to-air heat exchangers, along with oil coolers, inner coolers and tube bundles.
Heat exchanger repair shop
Quintel is an ASME-code heat exchanger repair shop with an R stamp. Quintel has available all the equipment needed to work on heat exchangers, including transportation to and from a customer facility, quality assurance, welding, pipe fabrication (carbon steel, stainless steel, Hastelloy® and aluminum), retubing, metallizing and final testing.
Custom heat exchanger repair services
From plugging a single tube, to the removal of deposits by chemical cleaning, to rebuilding units from the ground up, Quintel offers heat exchanger repair services to suit each customer and situation. Our 25 years of experience in the reconditioning and repair of heat exchangers is on your side when it comes to performing quality work on your vital equipment.
Our work also provides the same warranties as would apply to equipment direct from an OEM, and our customers can enjoy them at a fraction of the cost. Should repair of heat exchange equipment not be the most cost-effective solution in your case, we will be the first to tell you.
Our chart recorders ensure that test results are saved and can be utilized in preventative maintenance evaluations. All test results (along with the unit history) and any videos / DVDs produced will be supplied to the customer for their records.
As ASME-code heat exchanger repairers, our shop carries an R stamp, certifying our shop in the repair of repair and/or alteration of those pressure vessels, as well as boilers, and other pressure-retaining items. Therefore, whether your situation calls for a heat exchanger retubing, a heat exchanger air or water cleaning, a chemical cleaning, or a complete heat exchanger rebuild, contact us to get the job done right.
NDT for heat exchangers
Every unit that leaves our shop is guaranteed against leaks. A full set of NDT procedures are performed as appropriate to each vessel, including air testing of the tubes and the complete assembly, a vacuum test, a hydro test, and inspection by a borescope to detect corrosion.
Heat exchangers and equipment repair services
Below is a sampling of the kinds of heat exchangers and equipment that Quintel can repair, recondition and rebuild:
- Shell and tube heat exchangers
- Plate exchangers
- Air exchangers
- Air-cooled heat exchangers
- Marine heat exchangers
- Hydrogen coolers
- Water pump forced air heat exchangers
- Air-to-air exchangers
- Water-to-air heat exchangers
- Water coil heat exchangers
- Stainless-steel heat exchangers
- Turbine oil coolers
- After coolers and inner coolers
- Corrosion-resistant exchangers
- Heat exchange tube bundles
- Boiler-feed pump oil cooler
- XLE compressor inner cooler
- Air-compressor after cooler
- U-bend heater
- Main-turbine oil cooler
- Oxygen cooler
- Heating and cooling coils
- Cored inner cooler
- Graphite block
- Plate and frame
- Generator hydrogen cooler