Arjay Engineering to Exhibit at HydroVision Conference
Arjay Engineering has announced it will attend North America’s premier hydropower tradeshow in Minneapolis, US....
The Hydrosense 4410-OCM provides efficient real-time flow-through parts-per-million (ppm) monitoring of both petroleum and non-petroleum oil present in water.
The unique sensor design can optionally provide both fluorescence and light scatter simultaneously in one unit.
Fluorescence responds to dissolved and free (buoyant) hydrocarbons in water. This technology targets the aromatic hydrocarbons in the water and through a site calibration, correlates this to total oil.
Light Scatter can be used for turbidity indication or indication of free oils of any type such as synthetic and vegetable.
The closed-loop sample stream assembly communicates with the controller using a Modbus interface. This allows the sensor to be mounted remotely with two main benefits:
The device is ideal for:
Features and benefits
Specifications
Range: 1ppm-200ppm or mg/l
Accuracy: +/- 1% of calibrated range
Resolution: 0.15ppm or mg/l
Sensitivity: 463ppb crude reference, 145ppb diesel reference
Process temperature: 0°C-55°C (32°F-130°F)
Pressure to Sensor: minimum 2psig (14kPa), maximum 150psig (690kPa)
Flow rate: auto-regulated to 1.0l/m
Power Input: 24vdc or 80vac-240vac
Enclosures: Type 4 / IP65 coated steel, 316SS or polycarbonate
Ambient temperature: 10°C-55°C (32°F-130°F)
Certified to: Electrical Safety Standards UL / ANSI, CSA and IEC Standard 61010-1
Also available with a purge / pressurisation system for Div 2 and Zone 2 installations.
Arjay Engineering has announced it will attend North America’s premier hydropower tradeshow in Minneapolis, US....
The Hydrosense 4410-OCM is a flow-through real-time monitor for online ppm (mg/l) indication of petroleum...
This guide focuses on oil in water for environmental compliance. However, much of the content...
Arjay Engineering will take part in the Offshore Technology Conference 2019 (OTC) to showcase its oil in...